NEC Univerge SV9500 - Page 58

50
STEP 5: Select Automatic, No Tone, Tone
or Voice.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press - , and press or OK.
Note
When Automatic is set, the default setting (Tone) is
applied.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
0
1
2
3
0
3
0
1
2
3
OK
Back

1/1
[Key Touch Tone]
No Tone
Tone
Automatic
Voice