NEC Univerge SV9500 - Page 57

49
• TO SET KEY TOUCH TONE
The procedure below shows how to set Key Touch
Tone. Key Touch Tone is a tone generated when the
digit keys are pressed while DT830G is off-hook.
STEP 1: Display the Menu screen, and select Setting.
STEP 2: Select User Setting.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 3: Select Talk.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 4: Select Key Touch Tone.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
• Press .
1
1

Menu
OK
1
2
Data Backup/Restore
[Setting]
3
Download
User Setting
1/1
2
2
OK
Back
1/1
[User Setting]
1
2
3
4
5
6

Display
Change Password
Peripherals
Security
Incoming Call
Talk

7
Usability
3
3

Back
OK
1/1
[Talk]
1
2
3
4
5
Hold Music
Prefix
RTP Alarm

DTMF Tone
Key Touch Tone