NEC Univerge SV9500 - Page 56

48
STEP 4: Select DTMF Tone.
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press , or OK.
•Press .
STEP 5: Select Automatic, Disable or En-
able (see the following table).
Select an item by one of the following operations.
• Highlight an item by using or UP/DOWN soft key,
and press or OK.
• Press - , and press or OK.
OK
Back
1/1
[User Setting]
1
2
3
4
5
6

Display
Change Password
Peripherals
Security
Incoming Call
Talk

7
Usability
2
2

Back
OK
1/1
[Talk]
1
2
3
4
5
Key Touch Tone
Hold Music
Prefix
RTP Alarm

DTMF Tone
No. Menu Items Descriptions
0 Automatic
Follow the setting on the System. If
no setting is made in the System,
the default setting (DTMF=ON) is
applied.
1 Disable
Follow the setting on the terminal
(OFF).
2 Enable
Follow the setting on the terminal
(ON).
TIP
For the setting on the System, contact the System
Administrator.
TIP
Default setting is Automatic.
TIP
The enabled item is highlighted.
0
1
2
0
2
0
1

1/1
Automatic
OK
Back
Disable
2
Enable
[DTMF Tone]