NEC V230 - Page 78

69
5. Using On-Screen Menu
[OPTIONS(1)]
SelectingFanMode[FANMODE]
This option allows you to select three modes for fan speed: Auto mode, High speed mode, and High Altitude mode.
AUTO ..................... The built-in fans automatically run at a variable speed according to the internal temperature.
HIGH
...................... The built-in fans run at high speed.
HIGH ALTITUDE
..... The built-in fans run at a high speed. Select this option when using the projector at altitudes approximately
5500 feet/1700 meters (3000 feet/900 meters on V300X) or higher.
NOTE:
• Whenyouwishtocooldownthetemperatureinsidetheprojectorquickly,select[HIGH].
• ItisrecommendedthatyouselectHighspeedmodeifyouusetheprojectornon-stopforconsecutivedays.
• Ifyouusetheprojectorataltitudesapproximately5500feet/1700meters(3000feet/900metersonV300X)orhigher,youare
recommendedtoset[FANMODE]to[HIGHALTITUDE].Failuretodosomaycausetheprojectortooverheat,resultinginmal-
function.
High altitude V300X V260X/V230X/V260/V230
12000ft(3600m)
to
8500ft(2600m)
[HIGHALTITUDE]for[FANMODE]
5°to30°C
(ECO MODE ON only)
[HIGHALTITUDE]for[FANMODE]
5°to30°C
8500ft(2600m)
to
5500 ft (1700 m)
[HIGHALTITUDE]for[FANMODE]
5°to35°C
[HIGHALTITUDE]for[FANMODE]
5°to35°C
5500 ft (1700 m)
to
3000ft(900m)
[AUTO]for[FANMODE]
5°to40°C
3000ft(900m)
to
0
[AUTO]for[FANMODE]
5°to40°C
• Usingtheprojectorataltitudesapproximately5500feet/1700meters(3000feet/900metersonV300X)orhigherwithoutsetting
to[HIGHALTITUDE]cancausetheprojectortooverheatandtheprotectorcouldshutdown.Ifthishappens,waitacoupleminutes
and turn on the projector.
• Usingtheprojectorataltitudeslessthanapproximately5500feet/1700meters(3000feet/900metersonV300X)andsettingto
[HIGHALTITUDE]cancausethelamptoovercool,causingtheimagetoicker.Switch[FANMODE]to[AUTO].
• Usingtheprojectorathighaltitudesorinlowairpressurecanshortenthelifeofcomponents.
• Yoursettingwillnotbeaffectedevenwhen[RESET]isdonefromthemenu.
Selecting[COLORSYSTEM]
This feature enables you to select video standards manually.
Normallyselect[AUTO].Selectthevideostandardfromthepulldownmenu.ThismustbedoneforVIDEOandS-
VIDEO Connectors separately.