NEC V230 - Connecting to a Network (V300 X;V260 X Only)

17
2. Installation and Connections
Connecting to a Network (V300X/V260X only)
TheprojectorcomesstandardwithaLANport(RJ-45)whichprovidesaLANconnectionusingaLANcable.
Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings for the projector over a LAN.
TouseaLANconnection,youarerequiredtoassignanIPaddresstotheprojectoronthe[PROJECTORNETWORK
SETTINGS]screenofthewebbrowseronyourcomputer.Forsetting,seepage39, 40, 41.
ExampleofLANconnection
Example of wired LAN connection
LAN
Server
Hub
LAN cable (not supplied)
NOTE: Use aCategory5
orhigherLANcable.