NEC VERSA 4000 - Page 25

2-2 Using the Hardware
Keep the adapter connected whenever possible. The AC
adapter charges the battery whether or not you are using the
NEC Versa.
NOTE
Check that the AC outlet voltage falls in the
range of 100–240 Volts AC. Verify that the cord and
plug are appropriate for your AC source.
Connect the AC adapter as follows:
1. Connect the AC adapter cable to the power port on the
back of the NEC Versa 4000.
2. Plug one end of the AC power cable into the AC adapter
and the other end into a properly grounded 120- or 240-
volt wall outlet.
Connecting the AC adapter
AC Adapter
Power Port