2-4 Using the Hardware
When battery power gets low, do either of the following:
■ Put your system in Suspend mode, remove the battery
pack, and replace it with a fully charged Li-Ion battery.
■ Leave the battery pack in the system and connect your
NEC Versa to the AC adapter and a wall outlet. If you
connect the system to AC power and continue to use it,
the battery recharges in 2.5 to 7 hours. If you connect
the system to AC power and do not use it, the battery re-
charges in about 2.5 hours.
You can also buy an optional battery charger to quickly
charge your battery. See the online Options Catalog.
!
WARNING
To prevent accidental battery ignition or explosion,
adhere to the following:
■ Keep the battery away from extreme heat.
■ Keep metal objects away from the battery termi-
nals to prevent causing a short circuit.
■ Make sure the battery is properly installed in the
battery bay.
■ Read the precautions printed on the battery and
in the online
Basics
.
Replacing the Battery Pack
Replace the battery pack installed in your NEC Versa sys-
tem as follows.
1. Turn the NEC Versa over so that it is upside down with
the front of the system facing you.
To Next Page
Loading...
