Using the Hardware 2-31
PC Cards
You can easily install and change peripheral devices, such
as modems, LAN cards, and storage cards in your NEC
Versa 4000. The NEC Versa 4000 series notebook
computers have software that automatically allocates
system resources when you install or remove a PC card
using PCMCIA technology.
To insert a PC card, open the slot cover and follow these
steps.
1. Align the card so that the 68-pin connector points to-
wards the slot.
2. Slide the card into either slot. A low tone followed by a
high tone lets you know that the card is fully inserted
and recognized. (If you turn off the sound through Setup
or the PowerPanel, no sound is emitted.)
Other two-tone sequences such as high, then low tones
indicate that the card is inserted, but the card type is
unknown.
Inserting a card
To Next Page
Loading...
