3-20 Setting Up and Using the Software
Options include:
n /Sx — SCSI On/Off Control
x 0 = disables the SCSI port
1 = enables the SCSI port (default)
n /Ax — SCSI I/O Address Selection
x 0 = I/O address 140-15Eh (default)
1 = I/O address 340-35Eh
n /Ix — SCSI IRQ Enable/Disable
x 0 = enables IRQ (default)
1 = disables IRQ
n /Qx — SCSI IRQ Selection
x 0 = Use IRQ 10 (default)
1 = Use IRQ 11
4 = Use IRQ 14
5 = Use IRQ 15
n /Dx — SCSI DMA Enable/Disable
x 0 = enables DMA (default)
1 = disables DMA
n /Mx — SCSI DMA Selection
x 5 = Use DMA 5
6 = Use DMA 6
7 = Use DMA 7 (default)
To Next Page
Loading...