System Configuration and Setup 2-5
!
WARNING
To prevent accidental battery ignition or explosion, adhere to
the following:
Keep the battery away from extreme heat.
Keep metal objects away from the battery terminals to
prevent a short circuit.
Make sure the battery is properly installed in the battery
bay.
Read the precautions printed on the battery later in this
chapter.
Determining Battery Status
You can determine battery status via the battery gauge LEDs on the front of the
Lithium-Ion battery that ships with your NEC Versa LX computer.
Lithium-Ion battery
A
– Battery Gauge LED
B
– Alignment Groove
C
- LED Status Button
To check battery status, press the Battery Gauge LED status button to illuminate
the LEDs. The battery gauge LEDs indicate the following:
To Next Page
Loading...
