NEC Versa LX - Partition Magic

Disassembly and Reassembly 3-21
1. Remove two screws (
B
) from the CPU bay cover on the bottom of the NEC
Versa as shown in the following figure.
A
– CPU Bay Cover Screws
2. Remove the CPU cover.
3. Remove three screws (
A
)
as shown in the following figure.
A
– Screws
4. Lift and disconnect the CPU assembly from the unit.
Front Cover
The following describes the steps to remove the front cover.
1. Turn the system over with the bottom facing up.
2. Remove a total of 11 screws.
 6 from the bottom surface
(
A
)