3-26 Disassembly and Reassembly
Hard Drive Assembly
1. Disconnect the hard drive cable at connector P9 on the main board.
2. Remove three screws (
A
) and lift the hard drive assembly from the system.
A
– Hard Disk Drive Screws
PC Card Assembly
1. Remove three screws (
A
).
2. Lift the PC card assembly from the right side of the system.
A
– CPU Assembly Screws
CMOS Battery
1. Disconnect the CMOS battery cable from connector P28 on the main board.
2. The CMOS battery is held in place by double-sided pressure tape. Gently
pry up to remove.
To Next Page
Loading...
