Disassembly and Reassembly 3-15
3. Lift the VersaGlide assembly from the front cover assembly.
A
– Connector CP16
B
– VersaGlide Screws
LCD Panel Switch Board
Remove the LCD panel switch board as follows.
1. Disconnect the LCD panel switch cable from connector CP17 (
B
) on the
LCD panel latch switch board.
2. Remove 2 screws (
A
) and lift from the front cover assembly.
A
– LCD Cover Panel Switch Board Screws
B
– Connector CP17
This completes the disassembly of the front cover assembly. Reverse this
procedure to properly reassemble.
LCD Panel Assembly
Remove the LCD panel assembly as follows.
1. Disconnect cables from the LCD cable at P4 on the main board and the LED
sub-assembly cable at connector P2.
To Next Page
Loading...
