NEC Versa LX - Bottom Base Assembly; Disassembly - Non-User Replaceable Drive System; CPU Assembly

3-20 Disassembly and Reassembly
4. Remove one screw (
B
) to release the connector board from the bottom
assembly.
A
– Screws
B
– Connector CP8
Bottom Base Assembly
There are doors and tilt feet on the bottom assembly.
 All doors snap in and out.

To remove the tilt feet open the foot and slightly compress the four
sections together and snap out.
Disassembly – Non-User Replaceable Drive System
Use the following procedures to disassemble the non-user replaceable hard disk
drive system.
CPU Assembly
Remove the CPU assembly as described in the following procedure.