NEC Versa LX - Removing a Device from the Versabay III

3-4 Disassembly and Reassembly
Removing a Device from the VersaBay III
Use the following steps to remove a device from the VersaBay III.
1. Locate the VersaBay III release lock and release latch on the bottom of the
unit.
VersaBay III release lock
A
– VersaBay Release Lock
B
– VersaBay Release Latch
2. Slide the lock to the unlocked position before releasing the latch.
3. Slide the latch toward the battery bay and hold it.
4. Slide the device from the system.