3-16 Disassembly and Reassembly
2. Remove two screws (
A
) and lift and separate the LCD panel assembly from
the remainder of the system.
A
– LCD Panel Assembly Screws
LED Sub Assembly
The LED sub assembly consists of a board that contains three connectors and
status LEDs. The connectors are for the LCD panel switch, main board, and
microphone.
A
– Connector CP13
B
– Connector CP12
C
– Connector CP11
D
– Microphone
LCD Panel Switch
1. Remove two screws on the hinge bracket.
2. Disconnect the cable at connector CP13 on the LED board.
To Next Page
Loading...
