3-24 Disassembly and Reassembly
2. Remove 2 screws (
A
) and lift from the front cover assembly.
A
– LCD Cover Panel Switch Board Screws
B
– Connector CP17
This completes the disassembly of the front cover assembly. Reverse this
procedure to properly reassemble.
LCD Panel Assembly
Remove the LCD Panel assembly as follows.
1. Disconnect cables from the LCD cable at P4 on the main board and the LED
sub-assembly cable at connector P2.
2. Remove two screws (
A
) and lift and separate the LCD panel assembly from
the remainder of the system.
A
– LCD Panel Assembly Screws
To Next Page
Loading...
