2-6 System Configuration and Setup
Battery gauge LEDs
Note:
If the battery gauge LEDs display a combination
other than those depicted in the illustration, recharge the
battery overnight. If the problem still persists, contact NEC
CSD Technical Support.
In Windows NT environments, in addition to the battery gauge LEDs, use
SystemSoft’s PowerProfiler™ to determine battery status. Click on the battery
icon located on the taskbar. The PowerProfiler battery page displays.
To return the battery to its normal state, try the following:
remove and then reinstall the battery
fully recharge the battery.
When to Change the Battery
The following symptoms indicate that battery life is nearing an end. Replace
batteries that display these symptoms.
Shorter work times.
Discoloration, warping.
Hot to the touch.
Strange odor.
To Next Page
Loading...
