Pages
ASSEMBLING THE PARTS UNDERNEATH THE MOUNT
ING PLATE N" C (A 26/1/1) OF THE AUTOMATIC DE
VICE (Fig. 93) 100
- Preparation of assembling the group as shown in fig. 94 101
- Preassembling of group Fig. 95 102
How to adjust the group of Fig. 95 in the mounting
Plate N° C (A 26/1/1) for the Automatic Device (see
Fig. 98) 104
TAKING CARE OF THE SEWING MACHINE MOTOR .
108
A - Motor does not run at all or runs only sluggishly • . 108
B - How to replace the motor brushes 109
C - Motor turns tightly I l l
D - Motor runs but does not pull machine . . . 112
E - Motor is weak 112
F - Motor gets too hot 112
G - Motor smokes or emits a burning smell. . . . 113
H - Motor runs noisily or growls. Rattling noise during
Sewing 113
To Next Page
Loading...
