Necchi Supernova - Using the Correct Needle

INSTRUCTIONS TO BE GIVEN TO THE CUSTOMER
Using the correct needle.
The needle must be selected in accordance with the type of
material to be sewn, the kind of work to be performed and the
thickness of the thread to be used (see « Needle and Thread
Chart » in Instruction Booklet).
To insert the needle, proceed as follows:
Turn the balance wheel by hand toward you until the needle bar
reaches its highest position, then insert the needle so that the flat
portion
Fig. 1 Fig. 2
of its shank faces the groove in the needle bar. Push the needle
up into the needle bar as far as it will go, then firmly tighten the
screw in the needle clamp so that the needle is held securely in
the needle
bar (see Figs. 1 and 2).
9
Copyright -2004