Need help?Do you have a question about the Nedo COMMANDER2 HVA2N and is the answer not in the manual?
Details laser classes, safety instructions, and properties of emitted laser radiation.
Identifies and describes the function of each button on the control panel.
Explains symbols, error codes, and battery status indicators on the device display.
Highlights critical safety warnings related to battery charging and usage.
Step-by-step instructions for charging and operating the laser with rechargeable batteries.
Instructions and guidance for using standard disposable batteries in the laser.
Explains the laser's automatic levelling and operation mode for horizontal use.
Step-by-step guide to initiate and activate the single AUTOALIGN function.
Step-by-step guide to initiate and activate the permanent AUTOALIGN function.
Details the icons, symbols, and buttons found on the remote control's interface.
Details the displays, signals, and buttons on the laser receiver unit.
Procedure for verifying the horizontal accuracy of the laser measurement.
Procedure for verifying the vertical accuracy of the laser measurement.
Details laser classes, safety instructions, and properties of emitted laser radiation.
Identifies and describes the function of each button on the control panel.
Explains symbols, error codes, and battery status indicators on the device display.
Highlights critical safety warnings related to battery charging and usage.
Step-by-step instructions for charging and operating the laser with rechargeable batteries.
Instructions and guidance for using standard disposable batteries in the laser.
Explains the laser's automatic levelling and operation mode for horizontal use.
Step-by-step guide to initiate and activate the single AUTOALIGN function.
Step-by-step guide to initiate and activate the permanent AUTOALIGN function.
Details the icons, symbols, and buttons found on the remote control's interface.
Details the displays, signals, and buttons on the laser receiver unit.
Procedure for verifying the horizontal accuracy of the laser measurement.
Procedure for verifying the vertical accuracy of the laser measurement.
General| Measuring Range (Distance) | 0.05 m to 200 m |
|---|---|
| Accuracy (Distance) | ± 1.5 mm |
| Type | Laser Distance Meter |
| Protection Class | IP 54 |
| Resolution | 0.1° |
| Power Supply | 2 x AAA batteries |
| Features | Pythagoras function, area and volume calculation |
| Operating Temperature | 0°C to 40°C |
| Battery Life | Up to 5, 000 measurements |
| Measuring Range (Angle) | 0° to 360° |
To Next Page
