Press button shortly
The LCD shows „END AA“
To confirm, press button
again. PRIMUS 2 HVA2N
starts to operate in mode
AUTOMATIC and ROTATION.
.
NOTE
f When AUTOALIGN is active, following restrictions apply:
f PRIMUS 2 HVA2N rotates at a fixed speed of 600 rpm
f It is not possible to change into scanning mode
f It is not possible to change between AUTOMATIC and MANUAL operation.
f If the resolution of the laser detector is set to +/- 0,5mm, it will be changed automa-
tically to +/- 1.0mm.
To Next Page
Loading...
