29Chapter 4 . Calls
Note:
1. Your PIN2 code is required to enable fixed dialing numbers. To obtain your PIN2 code, contact your carrier.
2. Numbers are added to the FDN list, and when activated, FDN restricts outgoing calls to only those numbers
listed, or to numbers with certain prefixes.
3. PIN2 must be entered before hand or when applying such settings, which is unique to each card and
initially provided by the network operator.
Call forwarding
If your phone can not answer or you do not want to answer the call, you can transfer the call to
another phone number.
Tap Always forward/When busy/When unanswered/When unreachable, enter the phone number
you want to transfer to and tap TURN ON. Then the call will be transfered to the present number
always, when your own number is busy, unanswered, or unreachable.
Additional settings
• Caller ID: Display your number in outgoing calls.
• Call waiting: Turn on the switch to enable call waiting, then your will be notified of incoming calls
during a call.
4. 8 Advance settings
Go to Phone > > Advance settings to configure the following settings:
Display options
• Sort order: Tap Sort by to choose sorting by First name/Last name.
• Name format: Tap Name format to choose First name first/Last name first.
Sounds & vibration
• Ringtone: Tap SIM1 ringtone and SIM2 ringtone to choose the ringtone you like.
• Also vibrate for calls: If Also vibrate for calls is enabled, your phone will vibrate when receiving
incoming calls.
• Dial pad touch tones: Turn on or turn off the switch to enable or disable dial pad touch tones.
Quick responses
Tap the quick response you want to edit. Tap OK after finishing.
Auxiliary functions
• TTY mode: Tap TTY mode to configure the TTY mode. Tap to view the information of TTY
mode.
• Power buttons ends call: If Power buttons ends call is enabled, you can end call by pressing
Power button.
4. 9 Contacts
Add contacts
You have four ways to add new contacts:
• Add new contacts with Contacts app:
1 ) Go to Tools > Contacts and tap (You can also tap ADD A CONTACT if you are adding