38
Chapter 6 . Camera and photos
1. Swipe the screen left or right to switch to PRO mode.
2. Tap to display flash mode’s three options and select a flash mode.
3. You can set the functions like the following:
• Select metering mode: Tap to select a metering mode. You can select Center-weighted
metering,
Average metering or Spot metering.
• Adjust image parameters: Tap . You can adjust the Hue, Saturation, Brightness and
Contrast to make your image look more vivid.
• Adjust the ISO: Tap ISO and drag the slider to set the ISO. The ISO determines the camera’s
sensitivity to light. Increasing the ISO will create a brighter image, but there will be a noticeable
increase in noise.
• Adjust the shutter speed: Tap S and drag the slider to set the shutter speed. By default, the
shutter speed is set to Auto.
• Set the white balance: Tap AWB and drag the slider to select a white balance. You can choose
from filament lamp, fluorescent lamp, daylight, cloudy and shadows. You can also adjust the
color temperature.
• Adjust the exposure compensation: Tap EV and drag the slider to adjust the exposure
compensation. This setting changes the brightness of the image. Touch and hold a setting
to lock it.
• Change the focus mode: Tap AF and drag the slider to select a focus mode. You can choose
from AF and MF (manual focus). Touch and hold an area of the screen to lock the focus.
4. Choose the view you want to capture, position the camera, and then tap or press the Volume
button, or press and hold your fingerprint sensor to start shooting.
STREAMER
Streamer mode automatically sets a slow shutter speed to take long-exposure shots of light trails.
This mode produces stunning photos that have an ethereal quality. Streamer mode offers two
creative shooting modes for different subjects and light conditions: Traffic flow and Light painting.
1. Swipe the screen left or right to switch to STREAMER mode. Tap to view the details about
STREAMER mode.
2. Tap to change the shooting mode: Traffic flow and Light painting.
3. Tap to set a filter for your photo.
4. Choose the view you want to capture, position the camera, and then tap or press the Volume
button, or press and hold your fingerprint sensor to start shooting.
5. A preview of the image is displayed in the viewfinder. Tap or press the Volume button, or
press and hold your fingerprint sensor to stop capturing.
Continuous shot
Use continuous shot when you want to take a photo of a moving subject, such as during a football
match. The camera will capture several images in quick succession.
1. Touch and hold the or press and hold the Volume button to start the burst sequence. The
number of captured photos will be displayed in the bottom of the viewfinder.
2. Release or Volume button to stop the burst shooting.
3. Tap the image thumbnail or go to
Photos > Camera to view the photos.
Note:
1. This feature is not available in Pro mode, Panorama mode, Streamer mode and Face beauty mode.
2. You can take up to 40 photos in one burst sequence, provided that there is enough storage space on your
phone.
To Next Page
Loading...
