EasyManua.ls Logo

Neox crosser - Before Setting Off with Your Bicycle; Pre-Ride Checks and Preparations

Default Icon
52 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
NEOX User manual - Edition 03-2016 15
REMOVING AND INSTALLING
THE SUPPORT
This special support for your NEOX is contained in each package and can be used
for easy transport of your NEOX by car. For further information see the video on the
website www.myneox.it
BEFORE SETTING OFF
WITH YOUR BICYCLE
Be careful whenever you are riding a bicycle, there is a danger of serious falls and ac-
cidents, especially if the physical conditions, road surface or weather conditions are not
ideal.
Your e-bike is delivered to your dealer assembled. For safety purposes, some important
components are not completely assembled. Your dealer should perform the nal as-
sembly of your Neox, making it safe.
Make sure that your dealer has completed in its entirety the “inspection checklist for
delivery” in the delivery certificate.
• Only use your e-bike in a suitable sitting position.
Ask your dealer to adjust the saddle height so that it is in the correct position for you.
• Ask your dealer to instruct you about the technical features of your Neox.
• Treat your e-bike with spray wax.
FULLY CHARGE THE ACCUMULATOR PACK - THE FIRST 5 TIMES OF USE ENSURE
THE BATTERY IS COMPLETELY FLAT BEFORE FULLY RECHARGING.
Before each use
A bicycle that is not safe can give rise to dangerous riding situations, falls and accidents.
• Before every ride, check that it is able to operate safely.

Table of Contents