NEOX User manual - Edition 03-2016 17
The greater the body weight and the load, the higher the tyre pressure must be. Do not
exceed the maximum pressure marked on the tyre.
If the seat post is not inserted deep enough into the frame, it could separate from the
frame while riding and lead to dangerous riding conditions, falls and accidents.
• Make sure the seat post is inserted at the correct depth.
• Hold the saddle rmly with your hands and try to turn both the saddle and the seat
post inside the frame.
• The saddle and the seat post must not move.
• If the saddle and/or seat post move they must be suitably xed.
If the handlebars and handlebar stem are not fitted properly or are damaged this can
lead to dangerous riding conditions, falls and accidents.
• If you detect defects in these parts, or if you have doubts about them, immediately
stop using your e-bike.
• Perform a visual inspection of the handlebars and handlebar stem.
• The stem must be parallel to the front wheel rim and the handlebars must be in a
perpendicular position.
• Clamp the front wheel between your legs.
• Grip the handlebars at both ends.
• Firmly try to turn the handlebars in both directions.
• Again with force, push down with your hands and try to turn the handlebars in the
stem.
• No part must move or shift.
• You should not hear squeaks or creaks.
• Tighten according to the torque marked on the parts (Nm).
To Next Page
Loading...