NEOX User manual - Edition 03-201628
HOW TO TURN ON YOUR NEOX
1. Push starting button (7). The red led will turn on. (11).
2. At the starting of the monitor it will appear a number 1 in the center, and the version
of your Neox software downward (Fig. A).
3. Insert your PIN code composed by 4 numbers. With UP/DOWN buttons (8 and 9) se-
lect each number, one by one, and confirm each single number with Enter button (10).
At each confirmation, an asterisk appears beside the code (Fig. B).
After 3 seconds from the insertion of the code, the bike will turn on and will get in the
following gear position:
2nd gear URBAN | 3rd gear SPORTER | 4th gear CROSSER, CITY e TOURING
CAUTION: Do not press on the pedals during the start-up phase !!!
11
12
13
7 8 9
10
6
1 2 3 4 5
A B
To Next Page
Loading...