NEOX User manual - Edition 03-2016 23
• Loosen the locking screws (A) by a few turns until the seat moves easily and/or
you can adjust the inclination.
• Move the saddle to the desired position.
• Re-tighten the locking screws (A) with a torque wrench. The specified torque is
indicated on the seatpost.
adjusting the saddle height - fig. 02 (previous page)
• Loosen the locking of the seat post (B).
• Move the saddle with the seat post to the desired position being careful not to
exceed the maximum height line marked on the post.
• Re-lock the seat post (B).
adjusting the suspension forks (if present)
See the operating instructions inside the Neox packaging (only if your Neox has sus-
pension forks).
To Next Page
Loading...