The pedal assistance mode has 4 levels (including the no assist mode).
To move with the dierent levels the user must make sure that the e-bike is ON.
When you turn on the system, the pedal assistance function is activated at the maxi-
mum assistance mode “High” (6 fig. 1). The assistance is always set at this level when-
ever the bike is turned o and then on again.
In “No Assist” mode the energy supplied is 0, therefore the bike only moves forward
with the force that the user applies to the crank arms.
In “Eco” mode the energy supplied by the battery is minimal. This feature provides
greater autonomy with a lower level of assistance.
In “Standard” mode the pedal assistance is at the intermediate level.
In “High” mode the pedal assistance is at the maximum level, with a ratio of 1:2 (where
1 is the force of the user and 2 the force of the motor) and, consequently, the travelling
range will be considerably lower.
During a journey, an adequate selection of the assistance mode level, according to
the terrain or pedalling conditions, will provide an optimum relationship between the
economy of the battery and the ease of pedalling.
Decrease
assistance
Increase
assistance
0201
To Next Page
Loading...