Ness D8 User Manual

NESS D8 V4.7 CONTROL PANEL - USER MANUAL
12
The keypad PANIC function may have been
programmed to be either AUDIBLE - activates
siren or buzzers, or SILENT - If your system is
monitored by a Central Station, sends a PANIC
report by dialler. (If PANIC reports have been
enabled by your installer).
PANIC cannot be used while the panel is in
OPERATION
Program, Memory or Exclude mode.
Note: Your installer may have installed a separate
PANIC button. To activate the panic alarm simply
press that button.
Press...Press...
or...
or...
Both keys together
(If Keypad Panic Shortcut has been enabled by your installer) (If Keypad Panic Shortcut has been enabled by your installer)
[User Code]
PANIC
PANIC
PANIC
PANIC
ENTER
ENTER
Both keys together
or...
or...
[User Code]
LED KEYPAD
KEYPAD PANIC
LCD KEYPAD
The DURESS alarm can be used to send a silent
alarm to the Central Station that you are being
forced to Disarm the panel against your will. That
is; you are disarming under “duress.”
To Disarm and send a DURESS alarm, prefi x
your User Code with one of the digits 5, 6, 8 or
9 when Disarming.
* DURESS IS NORMALLY NOT ENABLED. TO ENABLE
THE DURESS FUNCTION, CONSULT YOUR INSTALLER
* DURESS ALARMS CAN ONLY USED BY SYSTEMS
WHICH ARE MONITORED BY A CENTRAL STATION.
* THE DURESS ALARM CAN BE PROGRAMMED TO
SOUND THE INTERNAL SIREN (RESET OUTPUT). THIS
OPTION IS OFF BY DEFAULT.
Disarms and sends a Duress Alarm report by dialler.* Disarms and sends a Duress Alarm report by dialler.*
Press... Press...
9
[User Code] [User Code]
LED KEYPAD
KEYPAD DURESS ALARM
LCD KEYPAD

Ness D8 Specifications

General

Brand	Ness
Model	D8
Category	Control Panel
Language	English