EasyManuals Logo

Ness D8 User Manual

Ness D8
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
NESS D8 V4.7 CONTROL PANEL - USER MANUAL
16
The Ness D8 now includes the ‘Temporary Day
Zone’ feature which allows easy and fl ex i ble Day
Zone selection and op er a tion.
Temporary Day Zones operate in addition to
Permanent Day Zones which are usually setup
by the installer.
While remaining in normal operating mode,
the user can add and remove ‘Temporary Day
Zones’.
As an extra feature, the user can easily enable
or disable Day Mode, (which includes both
Temporary and Permanent Day Zones).
Day Zones can be programmed by your installer
to beep the keypad, or briefl y sound the siren/s
or fl ash the strobe light, or to sound an optional
buzzer. (Although the keypad beeper provides
suffi cient warning in most situations).
TYPICAL APPLICATIONS
Day Zones are useful for a variety of applications
such as a shop door beeper, triggered by a reed
switch on the door.
For example, the shopkeeper can use 0+E to
en a ble Day Mode when he is work ing out the
back.
For extra security he can use the P+E com mand
to add additional Temporary Day Zones such as
the rear door or the fridge doors.
COMMANDS
(Accessed from normal op er at ing mode).
ENTER SELECTION MODE.
+
Press P fol lowed by E when in op er at ing
mode to enter Tem po rary Day Zone
se lec tion mode.
ZONE SELECTION.
[Zone No.]+
To select or deselect zones to be Tem po rary
Day Zones. The selected zones are in di cat ed
by the cor re spond ing zone number.
Permanent Day Zones, (installer op tion
P53E), are not displayed in selection mode.
Per ma nent Day Zones can be selected as
Tem po rary Day Zones but this has no effect
as those zones are already day zones.
EXIT SELECTION MODE.
Saves changes and returns to nor mal
op er at ing mode.
ENABLE DAY MODE.
+
This en a bles/dis a bles both Tem po rary and
Per ma nent Day Zones.
When Day Mode is enabled, any unsealed
day zone will sound the programmed
output for 2 seconds. When Day Mode is
disabled, an un sealed day zone will simply
be indicated on the keypad as an unsealed
zone.
(Note: The key pad does not in di cate if Day
Mode is en a bled or dis a bled).
TEMPORARY DAY ZONES

Other manuals for Ness D8

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ness D8 and is the answer not in the manual?

Ness D8 Specifications

General IconGeneral
BrandNess
ModelD8
CategoryControl Panel
LanguageEnglish

Related product manuals