UPM 2000
Netech Corporation
110 Toledo St, Farmingdale, NY 11735
http://www.Netech.org
14
1-800-547-6547
Summary of Features
Netech’s UPM 2000 digital ultrasound power meter provides an accurate means of
verifying and calibrating the output of therapeutic ultrasound devices. The
instrument measures output through a strain gauge bridge transducer.
After the initial output is verified, the UPM 2000 is used to accurately calibrate the
ultrasound unit under test.
In addition, the UPM 2000:
• Has a resolution of 0.1 W and a repeatability of ±-3% of
readings ± .2 watts from 0 - 30 W;
• Maintains electrical accuracy of .01 grams throughout
range;
• Features a large, backlit, easy to read display that enables
the user to quickly and accurately make power
measurements;
• Can accommodate a variety of transducer shapes and sizes
without interfering with the measurement;
• Has a drain hose and stopper for convenient and
controlled drainage of the tank.
• Has a built in draft shield for improved stability in
readings.
• Measures total-pulsed or continuous-average power.
• Has a selectable readout in grams or watts.
• Can be battery operated or line-powered 120 VAC for
long-term sessions.
• Has an RS232 interface.
• Has a field calibration check.
• Is housed in a sturdy Kydex
®
case.
• Is portable to meet the needs of service groups and
biomedical engineers.
• Comes with a soft carrying case as a standard accessory for
ease of transporting and storage.
To Next Page
Loading...
Need help?
General
