UPM 2000
Netech Corporation
110 Toledo St, Farmingdale, NY 11735
http://www.Netech.org
23
1-800-547-6547
Standard Accessories
• Transducer Clamp: The clamp frees the operator from holding the
transducer head in the transducer well during testing.
• Centering Rings: Rings used to help ensure that transducers are
centered and aimed at the cone properly. This is important for
accurate readings.
• Power Transformer: An AC wall mounted transformer is provided
for extended testing. The installation of this transformer will
bypass the battery and allow the unit to stay powered on for
extended use.
• Calibration Check Weight: A 100 gram OMIL class M1 weight is
included. This to be used to ensure the unit is operating properly
and is in allowable calibration range.
• Calibration support ring: This ring provides a platform for the 100
gram check weight when checking the unit's calibration and
performance.
• Carrying Bag: A soft bag used for safely transporting and storing
the unit.
• Shipping Container: This box contains specifically designed foam
inserts to ensure safe shipment of the UPM 2000 Power meter.
Please save these for future shipment of the unit for service or
calibration.
Note: The Carrying Case is an integral piece of the shipping container. Ship
with the carrying case in its original packing. See Chapter 4- Repackaging and
Shipping.
To Next Page
Loading...
Need help?
General
