UPM 2000
Netech Corporation
110 Toledo St, Farmingdale, NY 11735
http://www.Netech.org
4
1-800-547-6547
Warranty
Netech warrants the UPM 2000 against defects in materials and workmanship for one
year from the date of original purchase. The standard warranty is extended for a second
year if the instrument is returned to Netech for its recommended yearly recalibration.
During the warranty period, we will repair or, at our option, replace at no charge a
product that proves to be defective, provided you return the product shipping prepaid to
Netech Corporation. Only serialized products are covered under this warranty.
This warranty does not apply if the product has been damaged by accident or misuse or as
the result of service or modification by other than Netech Corporation, or if its serial
number is defaced or removed.
Netech reserves the right to discontinue the UPM 2000 at any time, and change its
specifications, price, or design without notice and without incurring any obligation.
Netech guarantees availability of service parts for 5 years after the manufacture of the
unit is discontinued.
The warranty is void if you elect to have the unit serviced and/or calibrated by someone
other than Netech Corporation.
The warranty covering your product becomes void when the tamper-resistant
Quality Seal is removed or broken without proper factory authorization.
We strongly recommend, therefore, that you send your instrument to Netech Corporation
for factory service and calibration, especially during the original warranty period.
The purchaser assumes all liability for any damages or bodily injury, which may result
from the use or misuse of the unit by the purchaser, his employees, agents, or customers.
Warranty may be void if shipping procedures are not adhered to.
In no event shall Netech Corporation be liable for consequential damages
To Next Page
Loading...
Need help?
General
