UPM 2000
Netech Corporation
110 Toledo St, Farmingdale, NY 11735
http://www.Netech.org
18
1-800-547-6547
UPM 2000 Specifications
•
Measurement range 0.1 to 30 Watts
• Input Power Level 0 - 30 W
• Input Frequency 0.5 - 10 MHz
• Resolution 0.1 W
• Accuracy, electrical +/- .15 W (+/-.01 grams)
throughout range
• Repeatability ± 3% of reading ± .2 watts
• Zero Shift Auto Zero button
• Acceptable Transducer Size up to 6.7 cm (2.65") diameter
• Operating Temperature 10
0
- 30
0
C (50
0
- 86
0
F)
• Power Requirements 9 V alkaline battery
(Duracell
®
MN1604 or
equivalent)
• Battery Life Maximum of 10 hours
Note: Unit will auto shut down after approximately 10 minutes of
inactivity when on battery power. (A 12-volt DC 300 mA transformer unit
is a standard accessory for longer-term test sessions) Refer to page 26.
λ Dimensions 9” wide x 14 ½” deep
λ Height 7 ½” (10 ¾” with Clamp Post)
λ Case Kydex
®
Unit Layout
To Next Page
