Security Gateway Manual Netgate-4200
2.1.3 Mounting the Power Supply
The mounting bracket for the power supply uses two zip-ties to hold the power supply to the mounting bracket. There
is no PDF for the Power Supply Bracket. Use the holes directly to mark the wall for mounting.
2.2 Connecting to the USB Console
This guide shows how to access the serial console which can be used for troubleshooting and diagnostics tasks as well
as some basic configuration.
There are times when directly accessing the console is required. Perhaps GUI or SSH access has been locked out, or
the password has been lost or forgotten.
© Copyright 2024 Rubicon Communications LLC 29
To Next Page
Loading...
