Netgate 7100 - Factory Reset Procedure

Security Gateway Manual XG-7100
2.12 Factory Reset Procedure
The Netgate 7100 DT firewall appliance does not have a hardware button to reset the configuration to factory defaults.
On this device it is still possible to perform a Factory Reset from GUI or Console.
See also:
• Factory Reset from GUI or Console
The linked document has complete details but the procedure can be summarized as follows:
Reset from the console:
• Connecting to the USB Console Port or SSH
• Choose menu option 4 to reset to factory defaults
• Confirm the action and allow the appliance to reboot
Reset from the GUI:
• Navigate to Diagnostics > Factory Defaults to perform the reset.
© Copyright 2024 Rubicon Communications LLC 74