NETGEAR CM500V User Manual

The BASIC Home page displays.
4. Select Voice.
The Voice Status page displays the following information:
• MTA Provision Status. This is the current MTA provision state.
• MTA MAC Address. This is the MAC address of the MTA interface.
• MTA Telephony Line 1 and Line 2 Status.These are the hook states of line 1 and line 2.
• MTA Line 1 and Line 2 HD Audio Status.These are the MTA HD audio states of line 1 and line
2 during codec negotiation. If the lines are enabled, it means that each line is capable of using the
G.722 codec.
5. To refresh the Voice Status page, click the Refresh button.
View the MTA Call List
You can view the multimedia terminal adapter (MTA) call list for your cable modem.You can also view the
codec used for the last call and some of the previous calls.
To view or refresh the MTA call list:
1. Launch a web browser from a computer that is attached over an Ethernet cable to the cable modem or
from a computer that is connected to a WiFi router that is attached over an Ethernet cable to the cable
modem.
2. Enter http://192.168.100.1.
A login window opens.
3. Enter the admin user name and password.
The user name is admin.The default password is password.The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select MTA Call List.
The MTA Call List page displays.
5. To see the most recent entries, click the Refresh button.
View the EMTA Event Log
You can view the embedded multimedia terminal adapter (EMTA) event log for your cable modem.
To view the EMTA event log:
1. Launch a web browser from a computer that is attached over an Ethernet cable to the cable modem or
from a computer that is connected to a WiFi router that is attached over an Ethernet cable to the cable
modem.
2. Enter http://192.168.100.1.
Monitor Voice Telephone Lines
16
Voice Cable Modem

NETGEAR CM500V Specifications

General

Product color	Black
DC-in jack	Yes
Modem (RJ-11) ports	2
Ethernet LAN (RJ-45) ports	1
Cables included	LAN (RJ-45), Phone (RJ-11)