NETGEAR DG834

Reference Manual for the ADSL Firewall Router DG834
Virtual Private Networking (Advanced Feature) 7-23
v2.0, September 2005
3. Fill in the IP Address or FQDN for the target VPN endpoint WAN connection and click Next.
4. Identify the IP addresses at the target endpoint which can use this tunnel, and click Next.
Figure 7-23
Figure 7-24
Enter the WAN IP address of the remote
VPN gateway: (e.g., 22.23.24.25)
Enter the LAN IP settings of the remote
VPN gateway:
• IP Address (e.g., 192.168.3.1)
• Subnet Mask (e.g., 255.255.255.0)