Router Internet Setup
11
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
2. From the N300 wireless modem router menu, select Basic Settings to display the Basic
Settings screen:
3. Select Yes or No depending on whether your ISP requires a login. This selection changes
the fields available on the Basic Settings screen.
• Ye
s. If
your ISP requires a login, select the encapsulation method. Enter the login
name. If you want to change the login time-out, enter a new value in minutes.
• No. If your ISP does not require a login, enter the account name, if required, and the
d
omain name, if required.
4. Enter the settings for the IP address and DNS server. If you enter or change a DNS
address, re
start the computers on your network so that these settings take effect.
5. If no login is require
d, you can specify the MAC Address setting.
6. Click Appl
y to save your settings.
7. Click Test to
test your Internet connection. If the NETGEAR website does not appear within
one minute, see Troubleshooting in Appendix A.
When your Internet connection is working, you do not need to launch the ISP’s login program
on yo
ur computer to access the Internet. When you start an Internet application, your N300
wireless modem router automatically logs you in.
To Next Page
Loading...
Need help?
General
