To Next Page

To Previous Page

Virtual Private Networking

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

Note: The VPN Status screen is only one of three ways to active a VPN

tunnel. See

Activate a VPN Tunnel on page 94 for information about

the other ways.

a. On the N300 wireless modem router menu, select VPN Status. The VPN Status/Log

screen displays:

b. Click the VPN Status button to display the Current VPN Tunnels (SAs) screen:

c. Click Connect for the VPN tunnel you want to activate. View the VPN Status/Log

screen to verify that the tunnel is connected.

VPN Tunnel Control

Activate a VPN Tunnel

There are three ways to activate a VPN tunnel:

Default Chapter2
- Technical Support2
- Table of Contents3
Chapter 1 Router Internet Setup7
- Using the Setup Manual7
- Log in to Your N300 Wireless Modem Router8
- Use the Setup Wizard9
- View or Manually Configure Your ISP Settings10
- Configure ADSL Settings14
Chapter 2 Wireless Settings15
Plan Your Wireless Network15
- Wireless Placement and Range Guidelines16
- Wireless Security Options17
Manually Configure Your Wireless Settings18
Configure WEP Wireless Security20
- Configure WPA, WPA2, or Mixed WPA2 + WPA Wireless Security22
Use Push 'N' Connect (WPS) to Configure Your Wireless Network24
- Use a WPS Button to Add a WPS Client24
- Use PIN Entry to Add a WPS Client25
- Configure Advanced WPS Settings27
Connect Additional Wireless Client Devices after WPS Setup27
- Add more WPS Clients28
- Add both WPS and Non-WPS Clients28
Restrict Access to Your N300 Wireless Modem Router29
Wireless Guest Networks31
Live Parental Controls33
Chapter 3 Security Settings34
- Protect Access to Your N300 Wireless Modem Router34
  - Change the Built-In Password35
Restrict Access by MAC Address35
Block Access to Internet Sites37
Firewall Rules38
Port Forwarding41
- Add a Pre-Set Port Forwarding Rule42
- Add a Custom Port Forwarding Rule42
Port Triggering43
Block Access to Internet Services45
Schedule Blocking46
View Logs of Web Access or Attempted Web Access46
Configure Email Alert and Web Access Log Notifications48
- Set the Time49
Chapter 4 Network Maintenance50
- Upgrade the Firmware50
  - Manually Check for Firmware Upgrades51
  - Network Maintenance51
- View N300 Wireless Modem Router Status Information53
  - Connection Status55
  - Statistics56
- View a List of Attached Devices57
- Manage the Configuration File58
  - Back up and Restore the Configuration58
  - Erase the Configuration58
- Run Diagnostic Utilities and Reboot the Router59
- Enable Remote Management Access60
- Traffic Meter61
Chapter 5 USB Storage64
Chapter 5 USB Storage65
- USB Drive Requirements65
- File Sharing Scenarios65
- USB Storage Basic Settings67
  - Edit a Network Folder69
- Configure USB Storage Advanced Settings70
  - Create a Network Folder71
- Media Server Settings72
- Unmount a USB Drive72
- Specify Approved USB Devices73
- Connect to the USB Drive from a Remote Computer73
  - Locate the Internet Port IP Address74
  - Access the Router's USB Drive Remotely Using FTP74
- Connect to the USB Drive with Microsoft Network Settings74
Chapter 6 Virtual Private Networking77
- Overview of VPN Configuration77
  - Client-To-Gateway VPN Tunnels77
  - Gateway-To-Gateway VPN Tunnels77
- Plan a VPN78
- VPN Tunnel Configuration79
- Set up a Client-To-Gateway VPN Configuration80
  - Step 1: Configure the Client-To-Gateway VPN Tunnel80
  - Step 2: Configure the NETGEAR Prosafe VPN Client83
- Set up a Gateway-To-Gateway VPN Configuration90
- VPN Tunnel Control94
- Set up VPN Tunnels in Special Circumstances100
  - Use Auto Policy to Configure VPN Tunnels101
  - Use Manual Policy to Configure VPN Tunnels107
Chapter 7 Advanced Settings (Part110
- Use the LAN Setup Options110
  - Use the N300 Wireless Modem Router as a DHCP Server112
  - Address Reservation113
- Use a Dynamic DNS Service114
- Configure the WAN Setup Options115
  - Set up a Default DMZ Server117
- Set up Quality of Service (Qos)118
  - Configure Qos for Internet Access118
  - Edit or Delete an Existing Qos Policy121
- Configure Static Routes121
- Wireless Repeating (also Called WDS)123
Chapter 8 Advanced Settings (Part 2)128
- Common Connection Types128
- Assess Your Speed Requirements129
- Optimize Your Network Bandwidth130
- Optimize Wireless Performance131
- Change the MTU Size132
- Universal Plug and Play133
Appendix A Troubleshooting135
- Quick Tips135
- Troubleshoot with the Leds136
- Cannot Access the N300 Wireless Modem Router Menu138
- Cannot Access the Internet139
  - Check the Configuration139
  - Check the WAN IP Address139
- Troubleshoot a Network Using the Ping Utility140
  - Test the LAN Path to Your Router140
  - Test the Path from Your Computer to a Remote Device141
- Problems with Date and Time142
- Wireless Connectivity142
- View Available Networks143
Appendix B NETGEAR VPN Configuration144
- Configuration Profile144
  - Step-By-Step Configuration145
- N300 Wireless Modem Router with FQDN to Gateway B147
  - Configuration Profile147
  - Step-By-Step Configuration148
- Configuration Summary (Telecommuter Example)150
- Set up Client-To-Gateway VPN Configuration (Telecommuter Example)151
- Monitor the VPN Tunnel (Telecommuter Example)159
  - View the VPN Router's VPN Status and Log Information160
Appendix C Default Configuration and Technical Specifications161
- Restore the Factory Configuration Settings161
  - Use the Restore Factory Settings Button161
- Technical Specifications164
Appendix D Notification of Compliance165
- Regulatory Compliance Information165
- Fcc Declaration of Conformity167
- Canadian Department of Communications Radio Interference Regulations168
- Industry Canada168
Index170

Brand	NETGEAR
Model	DGND3300v2
Category	Wireless Router
Language	English

NETGEAR DGND3300v2 User Manual

Table of Contents

Other manuals for NETGEAR DGND3300v2

Questions and Answers:

NETGEAR DGND3300v2 Specifications

Related product manuals