7
1
1. Router Internet Setup
Connect to the network
This chapter describes how to configure your N300 Wireless Modem Router Internet
connection. When you install your N300 wireless modem router using the Resource CD as
described in the N300 Wireless Dual Band ADSL2+ Modem Router Installation Guide, these
settings are configured automatically for you. This chapter provides instructions on how to
log in to the N300 wireless modem router for further configuration.
Note: NETGEAR recommends that Windows users use the Smart
Wizard™ on the Resource CD for initial configuration
. Mac and
Linux OS users should access the
Setup Manual on the Resource
CD.
This chapter includes the following sections:
• Using the Setup Manual on p
age 7
• Log In to Your N300 Wireless Modem Router on
page 8
• Use the Setup Wizard on p
age 9
• View or Manually Configure Your ISP Settings o
n page 10
• Configure ADSL Settings on p
age 14
For more information about the topics covered in this manual, visit the suppo
rt website at
http://support.netgear.com.
Using the Setup Manual
For first-time installation of your wireless N300 wireless modem router, refer to the Setup
Manual. The Setup Manual explains how to launch the NETGEAR Smart Wizard on the
Resource CD to step you through the procedure to connect your N300 wireless modem
router and computers. The Smart Wizard will assist you in configuring your wireless settings
and enabling wireless security for your network. After initial configuration using the Setup
Manual, you can use the information in this User Manual to configure additional features of
your wireless N300 wireless modem router.
To Next Page
Loading...
Need help?
General
