USB Storage
71
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
Create a Network Folder
From the USB Storage (Advanced Settings) screen, click the Create a Network Folder button
to open the Create Network Folder screen:
You can use this screen to create a folder and to specify its share name, read access, and
write access from All - no password to admin. The password for admin is the same one that
is used to log in to the N300 wireless modem router main menu. By default it is password.
Note: You need to click Apply in order for your changes to take effect.
Available
Network Folders
Folder Name Full path of the used by the network folder.
Volume name Volume name from the storage device (either USB drive or
HDD).
T
otal/Free Space The current utilization of the storage device.
Share Name • You can click the name shown, or you can type it into the
address fi
eld of your Web browser.
• If Not Shared is shown, then the default share has been
de
leted and no other share for the root folder exists. Click the
link to change this setting.
Read/Write Access • Shows the permissions and access controls on the network
folder:
• All - no password allows all users to access the network folder.
• admin prompts you to enter the same password that you use
to log in to the N300 wireless modem router main menu.
Fields Description
To Next Page
Loading...
Need help?
General
