To Next Page

To Previous Page

Router Internet Setup

N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2

For installation instructions in a language other than English, see the language options on the

Resource CD.

You can log in to the N300 wireless modem router to view or change its settings. Links to the

Knowledge Base and documentation are also available on the N300 wireless modem router

main menu.

Note: Your computer needs to be configured for DHCP.

When you have logged in, if you do not click Logout, the N300 wireless modem router waits

for 5 minutes after no activity before it automatically logs you out.

 To log in to the N300 wireless modem router:

1. Type http://www.routerlogin.net, or http://www.routerlogin.com, or the N300 wireless

mod

em router’s LAN IP address (the default is 192.168.0.1) in the address field of your

browser, and then press Enter. A login window displays:

2. Enter admin for the N300 wireless modem router user name and your password (or the

default, password

). For information about how to change the password, see Change the

Built-In Password on page 35

Note: The N300 wireless modem router user name and password are not

the same as any other user name or password you might use to log

in to your Internet connection.

If the N300 wireless modem router has never been configured, the Smart Wizard screen

displays. After the N300 wireless modem router has been configured, the Firmware

Upgrade assistant will appear. See Use the Setup Wizard on pag

e 9.

NETGEAR DGND3300v2 User Manual

Other manuals for NETGEAR DGND3300v2