Virtual Private Networking
89
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
This causes a continuous ping to be sent to the first N300 wireless modem router.
After between several seconds and 2 minutes, the ping response should change from
timed out to reply.
Once the connection is established, you can open a browser on the computer and enter
the LAN IP address of the remote gateway. After a short wait, you should see the login
screen of the N300 wireless modem router (unless another computer is already logged in
to the N300 wireless modem router).
You can view information about the progress and status of th
e VPN client connection by
opening the NETGEAR ProSafe Log Viewer.
To launch this function, click the Windows St
a
rt button, then select Programs >
NETGEAR ProSafe VPN Client > Log Viewer. The Log Viewer screen for a successful
connection is shown in this figure:
Note: Use the active VPN tunnel information and pings to determine whether
a failed connection is due to the VPN tunnel or some reason outside the VPN
tunnel.
To Next Page
Loading...
Need help?
General
