NETGEAR DGND3300v2

Virtual Private Networking
92
N300 Wireless Dual Band ADSL2+ Modem Router DGND3300v2
 To configure a gateway-to-gateway VPN tunnel using the VPN Wizard:
1. Log in to Gateway A on LAN A. Select VPN Wizard. Click Next, and the Step 1 of 3
screen displays.
2. Fill in the Connection Name field and pre-shared key fields. Select the radio button for the
type of target end point, and click Next, and the Step 2 of 3 screen displays.
3. Fill in the IP address or FQDN for the target VPN endpoint WAN connection, and click Next..
The Step 3 of 3 screen displays.
4. Fill in the IP Address and Subnet Mask fields
for the target endpoint that can use this tunnel,
and click Next.