NETGEAR EAX80 - Page 39

The Connected Devices page displays the MAC addresses and virtual MAC addresses
for computers and WiFi devices that are connected to the extender network.
6. On the router, add the extender’s virtual MAC address and all the virtual MAC
addresses connected to the extender network to your router’s MAC filter table.
Note: To reserve a specific IP address for the extender, you must specify the first
virtual MAC address that displays for your extender’s 2.4 GHz or 5 GHz network in
your router’s IP reservation table. (The first virtual MAC address that displays for your
extender’s 2.4 GHz and 5 GHz networks is the same.)
7.
Enable the router’s MAC filter, wireless access control, or ACL.
User Manual39Extender Network Settings
Nighthawk AX8 8-Stream WiFi 6 Mesh Extender