EasyManuals Logo

NETGEAR EAX80 User Manual

NETGEAR EAX80
76 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #70 background imageLoading...
Page #70 background image
If you are installing the extender as an access point, make sure that you are connecting
your computer or WiFi device to the extender through a WiFi connection instead of
an Ethernet connection.
Make sure that your computer is set up to use DHCP (most are).
I forgot my admin user name address and password. What can I do?
On the login window, click the Username & Password Help link to answer the security
questions that you set up during the initial setup. For more information, see Recover a
forgotten user name or password on page 43.
To restore factory settings:
1. Use a sharp object such as a pen or paper clip to press and hold the Reset button
on the extender for seven seconds until the Power LED lights amber.
2.
Release the Reset button and wait for the extender to reboot.
The extender resets and returns to the factory default settings.
Find the Extender’s IP address
If your extender and router use the same WiFi network name (SSID) and you want to
log in to your extender using an Android device, you must use the extender’s IP address.
You can log in to your router to find your extender’s IP address. If you own a NETGEAR
router, use the following procedure to find the extender’s IP address. If you do not own
a NETGEAR router, see your router's documentation.
Note: The following instructions might not apply to your NETGEAR router. For more
information, see your NETGEAR router’s user manual.
To log in to your router and find your extender’s IP address:
1.
Launch a web browser from a computer or mobile device that is connected to the
router network.
2.
Enter http://www.routerlogin.net/.
A login window opens.
3. Enter the router admin user name and password.
The user name is admin. The password is the one that you specified the first time
that you logged in. The user name and password are case-sensitive.
The BASIC Home page displays.
4. Select Attached Devices.
A list of devices connected to your router displays.
User Manual70FAQs and troubleshooting
Nighthawk AX8 8-Stream WiFi 6 Mesh Extender

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the NETGEAR EAX80 and is the answer not in the manual?

NETGEAR EAX80 Specifications

General IconGeneral
Product typeTabletop router
CertificationFCC, CE, RoHS
Product colorBlack
Indication lightYes
Power source typeDC
Package depth326 mm
Package width260 mm
Package height130 mm
Package weight1594 g
Master (outer) case width294 mm
Master (outer) case height342 mm
Master (outer) case length364 mm
Master (outer) case weight3930 g
Harmonized System (HS) code85176990
Quantity per master (outer) case2 pc(s)
DSL WAN-
WAN connection typeRJ-45
Channels quantity8 channels
WLAN data transfer rate (max)6000 Mbit/s
Modulation1024-QAM
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac), Wi-Fi 6 (802.11ax)
Security algorithms128-bit AES, AES
Ethernet LAN data rates10, 1000 Mbit/s
Ethernet LAN interface typeGigabit Ethernet
Ethernet LAN (RJ-45) ports4
USB 3.2 Gen 1 (3.1 Gen 1) Type-A ports quantity1
TypeNetwork repeater
Maximum transfer distance- m
Weight and Dimensions IconWeight and Dimensions
Depth197 mm
Width106 mm
Height279 mm
Weight860 g

Related product manuals