NETGEAR EX7000 User Manual

Maintain and Monitor the Extender
40
AC1900 Nighthawk WiF Mesh Extender
4. Click the Menu icon .
The extender menu displays.
5. Select Do More >
Access Schedule.
The Access Schedule screen displays.
6. Select the Automatically adjust for daylight savings time check box.
7. click the SA
VE button.
Your settings are saved.
Manually Set the Extender Clock
 To manually set the extender clock:
1. Launch a web browser from a computer or mobile device that is connected to your
extender network.
2. Log in to your extender:
• If you did not enable the One WiFi Name feature, enter http://mywifiext.local in the
address field of the browser
.
• If you enabled the One WiFi Name feature, enter one of the following URLs:
- W
indows-based computer. http://mywifiext or http://mywifiext.local
- Mac computers, iOS devices, and Linux devices. http://mywifiext.local
- Android devices. http://<extender
’s IP address> (for example, http://192.168.1.3)
For information about how to find the extender’s IP address, see Find Extender
’s
IP Address on page 69.
A login page displays.
3. Enter your admin email address and password and click the LOG IN button.
The Status page displays.
4. Click the Menu icon .
The extender menu displays.
5. Select Do More >
Access Schedule.
The Access Schedule screen displays.
6. In the Extender Clock section, select the Manual radio button.
7. T
o specify the time, complete the fields or click the Sync Clock button to synchronize the
extender time to the time on the computer or WiFi device that you are using.
8. Click the SA
VE button.
Your settings are saved.

NETGEAR EX7000 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC1900
Number of Ethernet Ports	5
Ethernet Port Type	Gigabit
USB Ports	1 x USB 3.0
Antennas	3 external antennas
WiFi Band	Dual Band 2.4GHz and 5GHz
Processor	800MHz dual core
Security	WPA/WPA2