NETGEAR EX7000 User Manual

Share a USB Printer Through the Extender
62
AC1900 Nighthawk WiF Mesh Extender
3. Click the Network Scanner button.
The scanner screen displays so that you can use the USB printer for scanning.
Change NETGEAR USB Control Center Settings
You can stop the NETGEAR USB Control Center from starting automatically when you log in
to Windows. You can also change the language and specify the time-out to release the
connection to the USB printer that is connected to the extender.
 To turn off automatic NETGEAR USB Control Center startup:
1. Launch the NETGEAR USB Control Center
.
2. Select T
ools > Configuration.
3. Clear the Automatically execute when logging on W
indows check box.
4. Click the OK button.
Your settings are saved.

NETGEAR EX7000 Specifications

General

WiFi Technology	802.11ac
WiFi Performance	AC1900
Number of Ethernet Ports	5
Ethernet Port Type	Gigabit
USB Ports	1 x USB 3.0
Antennas	3 external antennas
WiFi Band	Dual Band 2.4GHz and 5GHz
Processor	800MHz dual core
Security	WPA/WPA2